Although the production of this machine has ended, product parts and support are still available. Also ask about our trade-in program towards the new Advantage.
Warranty Info
Services
On-Line Support
Related MSDS Documentation
Troubleshooting
If the disc is not removing the compound from the disc (it leaves areas of compound on the disc that don’t come into contact with the wheel). The light scratches are not coming out. If these things occur, you may need to lower the wheel allowing a more aggressive polish. If the finish is showing large lines or stripes in the disc or causes the disc to heat up real fast. If when you leave a disc for a 30 seconds or less and it causes the disc to wobble inside the machine. First push the disc in farther if this does not solve this problem the Wheel may need to be raised. If you are just getting to aggressive of a finish, you may want to raise the wheel, which will give you a finer finish. If the CD gets heat cracks in the disc the wheel must be raised!
Tips & Pointers
The machine should be cleaned every three months or after 1000 repairs. The outer casing can be washed with a damp non-abrasive cloth. Be sure not to get the switch wet. Use a damp cloth only. Do not spray water directly on any part of the machine. To clean the inside of the machine it is recommended that you use a small vacuum attachment. This will pick up the dust type residue real well. If you need a more thorough cleaning remove the outer casing, (be sure not to pull out any electrical connections). The switch should remain connected to the case. Lay the cover on its back and access the rest of the machine. Use a vacuum where ever possible. The remaining areas may be wiped with a damp cloth. DO NOT GET THE POLISH WHEEL WET. If you get the wheel wet you will need to replace it. Once you have the cover off inspect the wheel and evaluate whether it needs replacement now having the cover off for cleaning is the best time to do that.
If you have any Technical questions please call (480) 827-8786 and we will be glad to assist you in any way.
Although the production of this machine has ended, product parts and support are still available. Also ask about our trade-in program towards the new Advantage.
