Description
Policool Mixer Gear head with Motor. Also includes (8) Replacement Rivets, (2) Motor Mount Screws, and Mixer Paddle Shrink Tubing to retain pin.
This kit requires the following tools and supplies that are not included.
- Silicone to reseal motor to base
- Soldering Iron and Solder to reconnect Motor wires.
- Razor blade or sharp knife to remove Shrink tubing from Paddle.
- Drill and Drill bit to drill hole through new motor shaft. (you must keep and re-use the retaining pin from your old mixer).
- Heat Gun to Shrink Tubing back to paddle shaft to capture retaining pin.